Value Hobby Sabre-44 3D Profile, Инструкция по эксплуатации

Страница: 11 / 19

www.valuehobby.com/sabre-44.html
11
Step9. Thread the aileron servo pushrod to the link
ball. Install the ball link set to the control horn.
Step10. Center the control surface, and tighten the
grub screw to secure the pushrod wire to the servo
arm.
Step11. Repeat the previous steps to install the
other servo.
Section 5: Horizontal Stabilizer and
Elevator Installation
Required items:
Horizontal stabilizer (1)
Elevator (1)
Hinge (5)
Step1. Use a hobby knife to remove the coverings
for the horizontal stabilizer opening.
Step2. Insert five hinges into the pre-cut slots in the
horizontal stabilizer.
Step3. Apply some thin CA to glue the hinges to the
horizontal stabilizer.
Step4. Attach the elevator to the horizontal
stabilizer through the hinges.