Value Hobby Sabre-44 3D Profile, Инструкция по эксплуатации

Страница: 12 / 19

www.valuehobby.com/sabre-44.html
12
Step5. Apply some thin CA to glue the hinges to the
elevator.
Step6. Slide the stabilizer into the position in the
fuselage. (Make sure the stabilizer is centered and
is parallel to the wing).
Use a ruler or string to measure and make A=B.
Step7. Use a felt-tipped pen to trace the outline of
the fuselage onto the stabilizer, both on the top
and bottom.
Step8. Carefully use a hobby knife to trim the
covering 1.5mm (0.06in) from inside the lines, both
on the top and bottom. (Note: Don’t cut into the
wood)