Value Hobby Sabre-44 3D Profile, Инструкция по эксплуатации

Страница: 16 / 19

www.valuehobby.com/sabre-44.html
16
Step5. Locate the slot in the rudder for control horn,
and use a hobby knife to cut through the coverings.
Step6. Position the control horn into the rudder,
and apply some thin CA to glue it securely.
Step7. Install the rudder servo in the fuselage.
Step8. Use the servo pushrod to connect the servo
and control horn as shown. (Remember to center
the control surface before tighten the grub screw).
Section 8: Motor & Prop Installation
Required items:
Motor mount (1)
Motor with prop adapter (1) (sold separately)
Prop (1) (sold separately)
Mounting screws for motor---M3*15mm (0.6in)
socket head cap screw (4)
M3 locknut (4)
Step1. Use a hobby knife to remove the coverings
for motor mount.