manualshive.com logo in svg

Valtra T144, Руководство оператора

Поделиться
Скачать
Valtra T144 Скачать руководство пользователя страница 319

4.7.5.6 

Changing engine air filters

Change the main air filter and safety filter periodically.

2

1

GUID-E4D40011-78C9-461A-A7AC-5234502A3B76

1. Main air filter

2. Safety air filter

The safety filter protects the engine if the main air filter gets damaged.

IMPORTANT: Never run the tractor without the safety filter.

NOTE: Do not clean the filters. Always change the filters according to the

maintenance schedule.

NOTE: In extremely dusty conditions the engine air filters must be changed more

frequently.

NOTE: Unless it is necessary, do not open the cover of the air filter housing.

1. Open the air filter housing.

4. Maintenance

- 317 -

Содержание T144































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды