manualshive.com logo in svg

Valtra T144, Руководство оператора

Поделиться
Скачать
Valtra T144 Скачать руководство пользователя страница 304

4.7.4.12  Adjusting the parking brake

The parking brake is adjusted in the factory and readjustment is not necessary

unless parts of the brake mechanism have been changed. Adjusting the driving

brakes affects the parking brake.
The parking brake is controlled with a spring return pressure cylinder and it is

connected to the drive brake mechanism by a cable.

IMPORTANT: Always adjust the driving brakes before adjusting the parking

brake.

1. Start the tractor.
2. Fit blocks in front of the front wheels to prevent the tractor from moving.
3. Move the power shuttle lever to neutral (centre position).
4. Pull the cable clearance to the end of the cable.

STOP

1

2

3

4

GUID-951D5D9B-B19C-41FC-9659-301FB0B9C9BC

1. Cable

2. Clearance

3. Adjusting nut

4. Locking nut

5. Open the locking nut.
6. Adjust the clearance through the adjusting nut so that it is 1-2 mm.
7. Tighten the locking nut.

IMPORTANT: When mounting the parking brake cable, the cylinder side end has

to be mounted according to the tolerances. This should only be carried out by an

authorised Valtra workshop.

4. Maintenance

- 302 -

Содержание T144































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды