manualshive.com logo in svg

Valtra T144, Руководство оператора

Поделиться
Скачать
Valtra T144 Скачать руководство пользователя страница 303

5. Tighten the brake adjusting nuts.

Adjust the nuts with the torque wrench to 20 Nm.

STOP

1

GUID-C72BEA93-C895-40DB-A0D0-A1FCDACA5E9F

1. Adjusting nut

6. Slacken the nuts.

Slacken the nuts 2.3 turns.

7. Check that the wheels can rotate freely.
8. Check the function of both brake pedals individually by driving.

Check that the brake action is the same on both wheels while driving with

both pedals latched together.

9. Check that the pedal free travel is the same on both wheels.

The pedal free travel must be 35-45 mm. Check with both pedals latched

together.
If the pedal free travel is not correct, readjust the travel.

10. Check the free travel on the rear brake pedal.

The reverse drive system is extra equipment.
The pedal free travel must be 60-70 mm.
If the pedal free travel is not correct, bleed the brakes.

4.7.4.11  Checking the parking brake

Check the parking brake periodically.
1. Engage the parking brake.
2. Check that the brake is functioning.
3. Release the parking brake.
4. Check that the brakes were released.
5. Adjust the parking brake if necessary.

4. Maintenance

- 301 -

Содержание T144































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды