manualshive.com logo in svg

Valtra T144, Руководство оператора, Страница: 143 / 414

Поделиться
Скачать
Valtra T144 Скачать руководство пользователя страница 143

3.9 

Displays

The tractor is equipped with the Proline instrument panel display on the

dashboard and the pillar display on the A-pillar.
The displays give information on the power shuttle, driving speed, fuel

consumption and so on. You can view and edit different values and setting

parameters via the displays.

3.9.1 

Adjusting display brightness

The brightness of the Proline instrument panel display and the A-pillar display is

adjusted with the dimmer. In addition, the dimmer adjusts the brightness of the

lights in the light panel, air condition panel, the whole Proline instrument panel

and all the switches and buttons that have a light.

1

5

20

30

40

50

0

5

0

20

25

30

GUID-DDE12599-FDF0-4C98-AD26-8C4F3158D417

1. Dimmer

•

Scroll the dimmer left or right to increase or decrease the brightness of the

displays.

3. Operation

- 141 -

Содержание T144































































































































































































































































































































































































































Отзывы:

Нет отзывов