Valtra T144 Скачать руководство пользователя страница 251

Страница: 251 / 414

WARNING: When the tractor is towing a trailer, the brake pedals must

be locked together. The brakes are not to be used individually for

steering.

WARNING: The pressure of the air pressure system must be at its

maximum, about 7-8 bar, before driving the tractor with a trailer

equipped with air pressure brakes.

When the trailer couplings are not in use, they must be covered.

3.23.3

Hydraulic trailer brake valve

The hydraulic trailer brake valve (optional equipment) operates with the pressure

of the tractor hydraulics, controlled by the tractor brakes.
The trailer brakes are connected to the tractor with a quick coupling at the rear

part of the tractor.

GUID-067368C4-2DF8-4D2A-9395-91F79E765C26

1. Quick coupling for the trailer brakes (ISO 5676)

DANGER: The hydraulic trailer brakes do not engage when the

parking brake is engaged.

DANGER: When the engine is not running, the trailer brakes do not

work.

DANGER: The quick coupling for hydraulic trailer brakes must be

connected when bleeding the brakes. If the quick coupling is not

connected, the brakes will not be bled. This will cause the brakes to

malfunction.

WARNING: When the tractor is towing a trailer, the brake pedals must

be locked together. The brakes are not to be used individually for

steering.

WARNING: Always test the operation of the trailer brakes in safe

ground after connecting a trailer with brakes.

3. Operation

- 249 -

Содержание T144































































































































































































































































































































































































































Результаты поиска

Содержание T144

Отзывы:

Бренды по названию

Популярные бренды

Valtra T144, Руководство оператора

Результаты поиска

Содержание T144

Отзывы:

Бренды по названию

Популярные бренды