manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 58

2

3

6

off

on

4

5

8

1

7

9

10

12

13

11

GUID-F4AF8B6A-BF95-48FE-8238-12635155227D

1. Seat depth and cushion angle adjustment

2. Storage compartment for manuals

3. Headrest height adjustment and removal

4. Seat heating

5. Lumbar support adjustment

6. Seat turning lock/release

7. Armrest adjustment

8. Forward/backward adjustment

9. Backrest inclination adjustment

10. Longitudinal suspension adjustment

11. Height and vertical suspension adjustment

12. Suspension stiffness adjustment

13. Seat belt anchor point

•

Adjust the seat depth and cushion angle.

•

To adjust the seat depth, pull up the right handle in the seat front.

•

To adjust the seat cushion angle, pull up the left handle in the seat front.

•

Turn the seat.

•

Release the lock by pulling the lock/release lever upwards.

•

Turn the seat to the desired position.
The seat has set positions from 180° anti-clockwise to 30° clockwise at

intervals of 10°.

3. Operation

- 57 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды