manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора, Страница: 292 / 370

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 292

1

GUID-5BC11973-9AA7-4627-B949-31F22DCBC7F6

1. Hydraulics breather

1. Unscrew the old breather.
2. Lubricate the seal on the new breather.
3. Tighten the breather by hand.

4.7.5.14  Checking the power shuttle operation

Contact an authorised Valtra workshop for checking of the power shuttle operation.
NOTE: Checking of the power shuttle operation must be done after 1 000

operating hours.

4.7.5.15  Tightening frame nuts and bolts

Tighten the frame nuts and bolts periodically.

4.7.6 

Maintenance every 2000 hours or every other year

4.7.6.1 

Changing oil in the transmission system

Change the oil in the transmission system periodically.
1. Run the tractor until the oil in the transmission system is warm.

This speeds up the oil drainage and most of the impurities come out with the

oil.

4. Maintenance

- 291 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов