manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 248

4.7.2 

Daily maintenance

4.7.2.1 

Checking the engine oil level

Check the engine oil level regularly.
The engine oil level must be checked when the oil has cooled off and has had

time to run down to the bottom of the oil sump.

1

2

GUID-E4DDC903-7F23-42B7-AE6F-DE5B64866366

1. Oil filler cap

2. Dipstick

1. Stop the engine and let it stand for a few minutes.
2. Pull out the dipstick.

The oil level must be between the maximum and minimum marks on the

dipstick.

3. Add oil through the oil filler cap, if necessary.
4. Inspect the oil sump and engine for leakage.

4. Maintenance

- 247 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды