manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 176

1

GUID-483E0119-D7B1-46B1-BD12-B8C10832EC05

1. Screw

1. Unscrew the screws.
2. Change the position of the check links' support.

The position should be the same on both sides of the tractor.

3. Tighten all screws.

3.13.6 

Automatic check links

The automatic check links are used to limit the distance between the lower links.
The automatic check links are extra equipment.
There are two types of automatic check links available, one adjusted with thread

and another adjusted with a locking pin.

NOTE: Adjust the check links so that they do not come into contact with the rear

wheels.

3.13.6.1  Adjusting thread-adjustable check links

1. Unfasten the closure pin.

1

GUID-53123B07-BC4B-4579-987D-A82A2E125F10

1. Closure pin

3. Operation

- 175 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды