manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 112

2. Press the side opposite to the symbol of the cruise control setting switch for

more than 2 seconds.

The cruise control indicator light blinks on the instrument panel indicating that

the setting value can be stored in the memory.

3. Release the button.

The setting is activated and stored in the memory. The indicator light is

continuously lit.
NOTE: If the driving speed cruise control is active, the engine speed cruise

control does not activate.

3.8.14.5  Activating and deactivating the engine speed cruise control

2

1

AUTO

AUTO

MIN

MAX

P 

GUID-B4AB052E-ECFE-4FC9-9773-111552889744

1. Cruise control OFF button

2. Cruise control setting switch

•

To activate the engine speed cruise control, press the side opposite to the

symbol of the cruise control setting switch.

•

To deactivate the engine speed cruise control, press the cruise control off

button.

When the cruise control function has been turned off, the engine speed

returns to the speed set by the hand throttle if it is greater than the one set

with the accelerator pedal.

3.8.14.6  Decreasing the cruise control setting

1

AUTO

AUTO

MIN

MAX

P 

GUID-388DFEF1-DB62-4C62-98C7-FA68A3AB51E7

1. Cruise control increasing/decreasing switch

3. Operation

- 111 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды