manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 284

1. Clean the filter and its surroundings.

1

GUID-D500A082-5ED3-48E0-ACDD-264373162FAD

1. Fuel filter

2. Remove the fuel filter.

Turn the filter anticlockwise and remove it from the mounting bracket.
IMPORTANT: Unscrew the filter by hand, do not use a filter wrench.

3. Lubricate the O-rings with fuel.
4. Fill the new filter with fuel.

Pour the fuel into the filter outer shell.

5. Attach the filter.
Bleed the fuel system.

4.7.5.7 

Changing the fuel prefilter

Change the fuel prefilter periodically.
Always use original Valtra fuel filters.

IMPORTANT: Using other fuel filters than the original ones, even for a short

period of time, may cause lower performance and expensive damages.

4. Maintenance

- 283 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды