9
1. YOU NEED TO KNOW FROM THE HOMEOWNER:
• Height of appliance and shelf, if used;
• Thickness and type of wall
fi
nish around
appliance;
• Trim
used;
• Optional accessories used (if any);
• Venting
con
fi
guration.
2. Unpack the appliance, removing all items packed
inside and around it. Recycle the packaging.
3. Check that you have everything, using the Pack Con-
tent sheet. Also, check that you have:
• Fuel bed (packed separately);
• Liner panels (packed separately);
• Remote Battery and Wall Switch Kit;
• HeatShift System components;
• Gas conversion kit (if necessary);
• Venting
accessories;
• Non-combustible
board;
• Electrical accessories (if used).
4. Carefully read the Installer’s Checklist included with
the
fi
replace for the installation sequence.
Caution
Only qualified, license, or trained personnel
should install this appliance.
WARNING
HeatShift System MUST be installed on
this appliance!
Installation Planning
Before Installing
