47
Installation
Fuel Beds
5. Place log 20 as shown, on top of the pilot shield.
6. Place log 25 with the pin in the front platform.
7. Place log 26 as shown, from on top of log 25 to the
platform. Insert the pin into the hole closer to the
burner.
20
21
22
25
26
25
8. Place log 23 from the front platform to the top of 26.
9. Place log 24 into the notch on top of 23.
10. Place log 28 as shown. There is a cutout that
fi
ts
over the right rear corner of the burner - the log
should be placed 1/8” away from the burner, not
directly against it.
25
26
23
25
26
23
24
28
