49
Decorative Glass Murano 1500DGM
Material required
• Steel platform (supplied with appliance)
• Decorative Glass Murano Glass kit, which contains:
• 1 glass platform
• 1 bag of clear 1/2”
fi
reglass
Installation
Carefully unpack the kit.
1. Install the steel platform around the burner as
indicated. The openings in the platform should be
underneath. The edge of the burner protrudes
above the platform.
2. Install the glass plate on the platform, the textured
side underneath and the smooth side on top. The
plate is
fl
ush with the edge of the burner.
Installed platform
Installed glass plate
3. Carefully spread the
fi
reglass on the surface of
burner patting it gently with your hand to form a
single layer to the approximate level of the top edge
of the
fl
ange around the burner. Do not place too
much to avoid blocking the burner ports.
4. Some
fi
reglass may be added on the platform to
cover the edge of the burner and in the space in
front and behind the pilot shield.
NOTE:
Ensure the area
within
the pilot shield is clear
of
fi
reglass.
Pilot shield
IMPORTANT:
Approved for use only with the
fi
reglass
provided with your Valor
fi
replace or the tempered
crushed
fi
reglass brands
American Fireglass™
or
fi
regear
. The use of any other
fi
reglass products may
void your
fi
replace warranty.
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of fireglass particles as these
could be ingested by small children.
Vacuum area after installation.
Installation
Fuel Beds
