background image

1.

THREE QUESTIONS ABOUT VENTILATION

1.1. Why is air replaced in dwellings?

Good ventilation promotes healthy living for both residents and the building. 

Air in a dwelling needs to

be replaced in order to remove humidity brought about by living as well as impurities
emanating from structures and human bodies. Impurities of indoor air include carbon
dioxide, formaldehyde, radon and other gases as well as dust.

Mechanical ventilation is needed in order to be able to adjust air circulation as needed by
the residents. In a tightly sealed house, air does not circulate sufficiently by natural means.
Even in a poorly sealed house air is only replaced because of differences between indoor
and outdoor air temperatures, or because of winds. This means that ventilation is dependent
on weather conditions and cannot be regulated.

It is especially important that humidity and carbon dioxide content of the indoor air stay at a
healthy level. Recommended humidity content of good indoor air is approximately 45%.
Humidity content is lower in winter and higher in summer and autumn. Dust mites thrive in
indoor air if humidity exceeds 50%, and if humidity stays at over 60% for a long time in
winter, water condenses in the cold structures of the house and mould starts to form.

The recommended maximum carbon dioxide content in good indoor air is circa 1,000 ppm.

1.2. What are the characteristics of adequate ventilation?

• Indoor air stays fresh in all the rooms of the dwelling, also in bedrooms during night.

Without adequate ventilation

, carbon dioxide content tends to rise high especially in

bedrooms.

• The bathroom and the sauna get dry quickly.
• During the heating season, the windows and other outer wall structures remain dry.
• Humidity in indoor air is not condensed in the ventilation ducts.
• Air is fresh in the toilet as well.

1.3. How much air is replaced?

For air to be clean to breathe, it has to be replaced with outdoor air 

every two hours

.

In a new and a renovated house, air needs to be circulated continually, at least once an
hour, during the first year in order to remove harmful gases and structural humidity. In
buildings that are more than a year old and dry, ventilation can be regulated as needed.
Ventilation is boosted during for instance a sauna bath, clothes washing and cooking, and
reduced during very cold periods or when there is nobody at home. Carbon dioxide and
humidity sensors adjust ventilation in the rooms automatically as needed.

SEASONAL CALENDAR

NOTE!
For further details, see inner pages.

Autumn

• Wash or change the coarse filter and clean

or change the fine filter if needed.  The
recommendation is approximately once a
year.

• Check that the heat recovery cell is clean.

•  Check that the condensing water outlet is

not clogged.

• Switch the post-heating radiator on.

Spring:

• Wash or change the coarse filter and clean

or change the fine filter if needed.

• Clean the fan blades and the post-heating

unit if needed.

• Check that summer ventilation is in

operation.

•  Switch the post-heating radiator off.

VALLOX DIGIT SE/SE VKL

THREE QUESTIONS ABOUT VENTILATION

3

4

1

2

3

4

3

1

2

VALLOX DIGIT SE, order of duct outlets

1.

Supply air to rooms

2.

Extract air to the unit

3.

Outdoor air to the unit

4.

Exhaust air outside

R MODEL

1.

Supply air to rooms

2.  Extract air to the unit
3.  Outdoor air to the unit
4.  Exhaust air outside

L MODEL

© VALLOX • We reserve the right to make changes without prior notification.

Содержание DIGIT SE

















Отзывы: