Valleylab RapidVac 1009803, Руководство по обслуживанию

Страница: 42 / 46

Responsibility of the Manufacturer
6-2 RapidVac™ Smoke Evacuator Service Manual
Responsibility of the Manufacturer
Valleylab is responsible for the safety, reliability, and performance of the smoke
evacuator only under the following circumstances:
• Installation and setup procedures in this manual are followed.
• Readjustments, modifications, or repairs to the unit are carried out by persons
authorized by Valleylab.
• The electrical installation of the relevant room complies with local codes and
regulatory requirements, such as UL.
• The accessories are used in accordance with the Valleylab instructions for
use.
For warranty information, refer to the Warranty at the beginning of this guide.
Obtaining a Return Authorization Number
Before you return the smoke evacuator, call the Valleylab Customer Service
Department (1-800-255-8522) for a Return Authorization Number or call your
Valleylab Representative for assistance.
Have the following information ready when you call:
• Hospital/clinic name/customer number
• Telephone number
• Department/address, city, state, and zip code
• Model number
• Serial number
• Description of the problem
Returning the Smoke Evacuator for Service
Follow this procedure when returning the smoke evacuator for service. Service
center information is provided below.
1. Remove the filter and any attached tubing and fluid container.
2. Clean the smoke evacuator thoroughly. Follow the procedures approved by
your institution or use a validated infection control procedure.
3. Attach a tag to the smoke evacuator that includes the Return Authorization
Number and the information listed above (i.e., hospital, phone number, etc.).
Notice
For repairs, return the smoke evacuator to Valleylab.
Warning
The ULPA filter captures potentially hazardous particles. Handle used filters as
you would any biohazardous material. Dispose of filters with other operative
waste materials according to the procedures for your institution.