Valley Vflex, Руководство пользователя, Страница: 22 / 38

22
Overview
Symbols and Conventions
This manual uses a few symbols and conventions
which are explained below:
Command Prompt
Any command which requires the operator to input
data will show a command prompt on the bottom line
of the screen.
The command prompt is always identified by > in the
bottom line of the screen. See Figure 22-1.
NOTE
• The value shown in parenthesis indicates
the current value being used by the control
module.
Exiting Screens
Press
0
or ESC one time to step backward from the
current screen to the previous screen.
Press
0
or ESC repeatedly to step backward from
the current screen, through previous screens until
the Status screen is displayed.
Screen Delays
Any screen that is left for more than five minutes
without pressing a key will revert back to the
previously displayed screen. The Status screen will
eventually be displayed.
Illustrations
The descriptions of procedures throughout this
manual consist of instructions illustrating the key or
series of keys to press followed by the screen that
appears. This convention is used throughout the
manual. Below is an example.
Press
DIAGNOSTICS
,
4
, and
1
to access the A/D screen.
See Figure 22-2.
1 2
0 EXIT
1 USE CURRENT
30 PSI
2 SET MANUAL
SELECT PRESSURE (30) >
Figure 22-1 1. Command Prompt
2. Default Value
0 EXIT 3 SYSTEM REVIEW LOG
1 SYSTEM FAULTS 4 IO
2 ERROR LOG
PRESS NUMBER >
1 A/D
2 MODULES
3 GPS
PRESS 0 . . EXIT >
0 42 3 1065 6 1234 9 2341
1 709 4 2481 7 0 10 9
2 779 5 2568 8 3698 11 0
PRESS ANY KEY >
Figure 22-2