Valley Vflex Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 38

Valley Vflex Скачать руководство пользователя страница 13

13

Safety

Operate Safely (Continued)

!

CAUTION

QUALIFIED SERVICE PERSONNEL

If you do not understand electricity or other parts
of the machine, have qualified service personnel
perform any hazardous repairs or maintenance.

!

CAUTION

GUARD ALL POWER TAKE-OFF DRIVES

This includes all belt and power line drives.
Replace any guards and shields removed for
maintenance.

!

WARNING

SUSPECTED SHORT CIRCUITS

DO NOT touch the machine if you suspect a short-
circuit situation. Call a qualified electrician or an
authorized Valley dealer immediately.
Circumstances which may cause you to suspect
hazardous voltage situations may include:
• Physical damage to the machine or span cable.
• Recent electrical storms (lightning).
• Unusual operating characteristics of the machine.
If you suspect a short circuit due to feeling a rippling
tingle when touching the machine,

DO NOT

touch

the machine again. Call a qualified electrician or an
authorized Valley dealer immediately.

!

WARNING

LIGHTNING AND THE MACHINE

Stay away from the machine during an electrical
storm. An irrigation machine makes a good path to
earth. It is also probably the tallest object in the field,
which makes it a good lightning receptor!

!

CAUTION

DO NOT OVERSIZE FUSES

Fuses are sized for the protection of a specific
machine.
Be certain you have the proper fuse sizes in place
before initial startup and when replacing fuses.

!

CAUTION

PLUG - IN CONNECTORS

Disconnect power before connecting or disconnecting
any plug-in connectors.

!

DANGER

DRIVE SHAFTS START WITHOUT WARNING

An electric motor on each tower of the center pivot
powers two drive shafts connected to wheel gear
drives. These drive shafts start and stop without
warning.
• DO NOT touch rotating drive shalt or shield, cloth-

ing or limbs may become entangled, resulting in
severe injury.

• DO NOT service the machine until the main dis-

connect is locked in the OFF position.

• ALWAYS replace drive shaft shields after servic-

ing.

• DRIVE SHAFT SHIELDS MUST ALWAYS BE IN

PLACE WHEN OPERATING THE MACHINE.

!

CAUTION

CHECK WHEEL TRACKS BEFORE STARTING

Make sure all objects, livestock, or persons are
clear of the machine before starting. Drive trains are
powerful and can climb over vehicles, equipment,
etc.

!

CAUTION

KEEP CHILDREN AWAY

Irrigation machines are NOT playground equipment.
Prevent children from playing or climbing around
on the machine. This can be extremely dangerous,
especially if the machine is operating.

«
...
11
12
13
14
15
...
»

Содержание Vflex







































Отзывы:

Нет отзывов