Valley Vflex, Руководство пользователя, Страница: 20 / 38

20
Overview
Pressure
Displays the current water pressure (P : XXX PSI) as
measured by the pressure transducer connected to
the VCS Control Panel.
Direction
Displays the direction of machine travel (DIR:XXX)
either Forward: FWD, Reverse: REV or Stopped: STP.
NOTE
• When used on and Inverted Corner the direc-
tion of the machine travel will be the opposite
of the direction displayed on the screen.
End Gun (EG)
Displays the current end gun function: ON or OFF.
Solenoid Numbers
Displays the number of each solenoid (SOL#
TEN+1234567890123456) when it is on. Numbers
are not displayed when solenoids are off.
For example: when solenoids 1, 2, 3, 11 and 12 are
on the display would look as below.
123 12
Modes
Displays the current sprinkler mode and active
override/sprinkler tables.
The sprinkler modes will be displayed as follows:
Chemigate: CHEM
Irrigate: IRR
The override/sprinkler tables will be displayed as follows with the top being the highest priority:
Location: LOC
Angle: ANGLE
Area: AREA
Main Status Menu (Continued)
Function Keys
The function keys are located on the far left side of
the keypad. See Figure 20-1.
The function keys are used to program the panel,
view data and select options not frequently used.
Following are explanations of each function key.
Home Key
Press this key to return to the Status
screen from the screen you are currently
on. See Figure 20-1.
HOME
Diagnostics Key
Press this key to determine the cause
of an unplanned machine shutdown or
potential problem situation. See Figure
20-1. Refer to page 29.
DIAGNOSTICS
Program Key
Press this key to choose the program
for irrigation, chemigation, set sequence
overrides and retracted psi. See Figure
20-1. Refer to page 24.
PROGRAM
Options Key
This key is used by your Valley dealer to
configure the VCS control panel during
installation. See Figure 20-1.
OPTIONS
hh:mm:ss CANGLE : 165 DEG Exx SPEED : xxx%
mm/dd/yy MANGLE : 303 DEG ADJ SPEED : xxx%
SOL# TEN+ P : XXX PSI DIR : XXX EG : OFF
1234567890123456 MODES: CHEM ANGLE
FUNCTION
KEYS
6
7
8
9
4
1 2
3
5
Figure 20-1 1. Pressure
2. Direction of Machine
3. End Gun Control
4. ON Solenoids Displayed
5. Mode Selection
6. Home Key 7. Diagnostics Key
8. Program Key
9. Options Key