![background image](http://html1.mh-extra.com/html/valex/l1201/l1201_instructions-for-use-and-safety-instructions_3239315015.webp)
15
The working life and costs also depend on constant and
meticulous maintenance.
Take good care of your power tool and clean it regularly. In this
way its efficiency will be ensured and its lifespan extended.
- Remove dust and machining residuals with a cloth or a brush
with soft bristles.
- Do not wet or spray water over the power tool - risk of internal
infiltrations.
- Do not use any inflammables, detergents or solvents.
- The plastic parts can easily be damaged by chemical agents.
- Do not use compressed air for cleaning: risk of projectile
material!
- Be careful when cleaning the switch, motor fan slots and
handgrips.
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM
CAUSES
SOLUTIONS
The power
tool fails to
start
Power supply line
disconnected
Check the electric power
supply line
Plug not inserted
Insert the plug in the elec-
tric power supply socket
and press the start button
Switch in the OFF
"O" position
Flip the switch to ON "I"
Electrical fault
Contact an authorised ser-
vice centre.
The power
tool vibrates
a lot
D a m a g e d o r
unbalanced ac-
cessory
Substitute the accessory
Incorrectly as-
sembled acces-
sory
Disassemble the accesso-
ry, clean the components
and reassemble according
to the instructions
IMPORTANT! If the power tool still fails to operate correctly
after you have carried out the above operations, or in the
event of anomalies other than those described above, take
it to an authorised service centre with proof of purchase and
ask for original spare parts. Always refer to the information
shown on the technical specifications label.
STORAGE
Clean the machine and all its accessories thoroughly (see
Maintenance section). Protect the unpainted parts
with protective oil and use the original packaging or case
(where fitted) to protect it.
Store the machine in a stable and safe position out of children's
reach. The place must be dry, free from dust, temperate and
protected from direct sunlight.
Keep children and unauthorised personnel out of the storage
room.
DISPOSAL
In order to protect the environment, proceed according to the
local laws in force. Contact the relevant authorities for more
information.
When the machine is no longer usable or repairable, deliver
the machine and packaging to a recycling centre.
Electric and electronic waste may contain potentially hazardous
substances for the environment and human health. It should
therefore not be disposed of with domestic waste,
but by means of separate collection at specific centres or
returned to the vendor in the event of purchasing a new
identical appliance.
The illegal disposal of such equipment may result in prose-
cution
to the full extent of the law.
WARRANTY
The product is protected by law against all non-conformities
with regard to its stated characteristics, provided that it has
been used solely in the way described in this user’s instruc-
tions, it has not been tampered with in any way, it has been sto-
red correctly, it has been repaired by authorised personnel and,
where necessary, only original spare parts have been used.
In the event of industrial or professional use or similar, the
warranty is valid for 12 months.
To issue a request for intervention covered by warranty,
proof of purchase must be shown to the retailer or authorised
service centre.
AMENDMENTS
The text, figures and data correspond to the standards in place
on the date of printing the instructions contained herein. The
manufacturer reserves the right to update the documentation
if changes are made to the appliance, without being bound
by any obligations.
© No part of this publication and the documentation
enclosed with the machine may be reproduced without written
permission from the manufacturer.
Declaration of conformity
The firm indicated on the label declares, under its own
responsibility, that the product complies with the essential
health and safety requirements contained in the following
European directives:
2006/42/EC, 2014/30/EC, 2011/65/EC
Person authorised to draft the technical booklet
At:
Valex SpA - Via Lago Maggiore 24 - 36015
Schio (VI) - Italy
Schio, 05-2016
An attorney
ARRIGO ZANELLA
Содержание L1201
Страница 16: ...16...