Valdemar V1 Series, Руководство по эксплуатации

Страница: 50 / 60

- 49 -
network configuration is successful. In this interface, you can change the device name
at
, select the device installation location (living room, master bedroom...), and then
click “Done” to directly enter the main interface of the device operation.
WIFI Connect Method 3: AP distribution network mode:
The 1 st step
◎
Select "AP MODE" on the WIFI interface of the wired controller, click "WIFI RESET" to
enter the AP network configuration mode, the "
" icon on the main interface flashes, and
the mobile phone can start network configuration.
◎
Exit the network configuration status after 3 minutes, the " " icon stops flashing, and the
WIFI module is no longer networked. If you want to configure the network again, you need
to click the "WIFI RESET" button on the WIFI interface again.