Vaisala WXT536, Руководство пользователя

Страница: 91 / 235

Chapter 7 ___________________________________________________ Retrieving Data Messages
VAISALA_______________________________________________________________________ 89
For changing the units, see Chapter 8 Sensor and Data Message
Settings, on page 127 .
Device Address (?)
This command queries the address of the device on the bus.
Command format: ?<cr><lf>
The response:
b<cr><lf>
Example:
?<cr><lf>
0<cr><lf>
If more than one transmitter is connected to the bus, see Appendix A
Networking, on page 187 .
For information on changing the device address, see Changing the
Communication Settings (aXU) on page 81 .
where
?
= Device address query command
<cr><lf> = Command terminator
where
b
= Device address (default = 0)
<cr><lf> = Response terminator.