Vaisala HUMICAP HMT330 SERIES, Руководство пользователя

Страница: 85 / 206

Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 83
IP Configuration
The IP settings of the LAN and WLAN interfaces are described in Table
15. The current settings can be viewed on the serial line or using the
device information display; see section
Device Information on page 107.
Table 15 IP Settings for the LAN and WLAN Interfaces
Parameter Description
Automatic configuration
(DHCP)
If enabled, the transmitter will retrieve its network
settings (including the IP Address) from a server in
the network. If disabled, static network settings are
used instead.
Web configuration If enabled, the settings of the interface can be
changed using a web browser. The configuration
page can be accessed by browsing to the IP
address of the transmitter.
IP Address The four part network ID of the transmitter. Must
be set manually if automatic configuration is not
used.
Example value:
192.168.0.222
Netmask Used together with the IP address to determine
which network the transmitter is a part of. Must be
set manually if automatic configuration is not used.
A common netmask is
255.255.255.0
Gateway IP address of the server that enables the
transmitter to access other networks. Must be set
manually if automatic configuration is not used.
Example value:
192.168.0.1
MAC The MAC address is the unique hardware address
of the LAN or WLAN interface. Cannot be
changed.