Vaisala HUMICAP HMT330 SERIES, Руководство пользователя, Страница: 109 / 206

Chapter 4 ________________________________________________________________ Operation
VAISALA ______________________________________________________________________ 107
FILT
Use the serial line command FILT [ xxx ] to set the filtering level.
FILT [ xxx ]<cr>
where
xxx = OFF, ON, or EXT (default = OFF)
Device Information
Use the display/keypad or the serial line to display the device
information.
Press the INFO button in the basic display to see the following
information:
- Current sensor operation (for example, chemical purge), if any, in
progress
- Present or past unacknowledged errors, if any
- Device information
- Current date and time (only shown if data logger module installed)
- Adjustment information fed by the user
- Measuring settings
- Information on chemical purge settings (when applicable)
- Display Alarm settings
- Serial interface information
- Network settings and status of the LAN and WLAN interfaces
- Analog output information
- Relay output information (when applicable)
1103-064
Figure 61 Device Information on Display
Proceed in the information views by pressing the MORE button as many
times as you get the desired information. You can browse through the
information displays also with arrow buttons. Press
OK to return to the
basic display.