Vaisala CAB100, Руководство по установке, Страница: 30 / 146

When working in explosion hazardous areas with installations involving
safety barriers or galvanic isolators, ensure that you comply with the safe work
procedure outlined in IEC/EN 60079-14 and possible applicable local safety standards.
CAUTION!
Do not modify the unit or use it in ways not described in the documentation.
Improper modification may lead to safety hazards, equipment damage, failure to
perform according to specification, decreased equipment lifetime, or the warranty
becoming void.
CAUTION!
For safety reasons, do not carry out installations alone. Safe installation
requires at least 2 people.
CAUTION!
More information
‣
Wiring diagrams (page 121)
‣
Layout diagrams (page 130)
4.1.1 ESD protection
Electrostatic discharge (ESD) can cause immediate or latent damage to electronic circuits.
Vaisala products are adequately protected against ESD for their intended use. However, it is
possible to damage the product by delivering an electrostatic discharge when touching,
removing or inserting any objects inside the equipment housing.
Avoid touching component contacts or connectors when working with the device.
4.2 Connecting AC (mains) power
Before connecting the AC (mains) power cable, switch off the power from
the main power source.
WARNING!
Before connecting power to the device, read carefully the safety notes in
Installation safety (page 27)
CAUTION!
CAB100 Installation Guide M212242EN-B
28