4 Operation
8
Operating instructions
multiMATIC
0020255037_00
4.2.3.2 Basic display for the Cooling operating
mode
Mode
Time
periods
Symbol
Desired setting
Auto
On
Desired cooling temp.
Off
Empty line
Day
Desired cooling temp.
off
Empty line
4.2.3.3 Basic display for the Ventilation operating
mode
Mode
Time
periods
Symbol
Desired setting
Auto
On
Max. vent. stage
Off
Max. vent. stage
Day
Ventilation stage
Set-back
Ventilation stage
4.2.3.4 Basic display for the Manual cooling
advanced function
Mode
Time periods
Desired setting
Activated
On
Desired cooling temp.
Off
Empty line
4.3
Operating concept
The controller is operated using two selection buttons and a
rotary knob.
You can use the selection buttons to do the following:
–
Navigate through the selection levels and the setting
level in the menu structure.
–
Select a set value.
–
Confirm a set value.
–
Navigate to the operating modes.
–
Cancel changing a set value.
You can use the rotary knob to do the following:
–
Navigate through the list entries for a selection level.
–
Select a selection level or setting level.
–
Change a selected set value.
The display shows an element that is highlighted by white
writing on a black background. A flashing, highlighted value
means that you can change the value.
If you do not operate the control for more than 10 seconds,
the background lighting switches off.
If you do not operate the control for more than 60 seconds,
the control becomes inoperative and dashes (--) appear on
the display instead of values.
If you do not operate the controller during a period of more
than 5 minutes, the basic display appears again.
4.3.1
Using the rotary knob to make settings in
the basic display
If the display shows the basic display, you can use the rotary
knob to change the desired setting.
The setting that you change depends on the selected basic
display, operating mode and the set mode for the operating
mode.
4.3.1.1 Changing the desired setting in the Heating
operating mode
OK
Desired day temperature
Only today: 18 °C
For long-term change,
press OK
Mode
Time
periods
Effect
Auto
On
Switch to another display view with the
request:
–
Permanent change to the
Day
temp. heating
–
Change to the
Day temp. heating
for six hours
Off
Direct change to the
Set-back temp.
heat.
for six hours
Day
Switch to another display view with the
request:
–
Permanent change to the
Day
temp. heating
–
Change to the
Day temp. heating
for six hours
Set-back
Direct change to the
Set-back temp.
heat.
for six hours
off
None
4.3.1.2 Changing the desired setting in the Cooling
operating mode
Mode
Time
periods
Effect
Auto
On
Direct permanent change to the
Day
temp. cooling
Off
None
Day
Direct permanent change to the
Day
temp. cooling
off
None
4.3.1.3 Changing the desired setting in the
Ventilation operating mode
Mode
Time
periods
Effect
Auto
On
Direct permanent change to the
Max.
vent. stage: Day
Off
Direct permanent change to the
Max.
vent. stge: Night
Day
Direct permanent change to the
Max.
vent. stage: Day
Set-back
Direct permanent change to the
Max.
vent. stge: Night
