Operation 4
0020255037_00
multiMATIC
Operating instructions
7
4.1.3
Selection level
Menu
Information
Desired temperatures
Timer programmes
Back
Select
1
4
3
2
1
Scroll bar
2
Current functions of the
selection buttons
3
Selection level list
entries
4
Current function or
selection level
The scroll bar
(1)
only appears if there are more list entries
than can be shown at once on the display.
4.1.4
Setting level
Zone 1
Set-back temp. heat.
Set-back temp. heat.
Day temp. cooling
Day temp. cooling
Day temp. heating
Day temp. heating
Back
Change
20.0 °C
20.0 °C
26.0 °C
26.0 °C
15.0 °C
15.0 °C
2
1
3
5
4
1
Current selection
2
Current selection level
3
Values
4
Current functions of the
selection buttons
5
Setting level
In the setting level, you can select the values you want to
read or change.
4.1.5
Soft key function for the selection buttons
Both selection buttons have a soft key function, i.e. different
functions may be assigned to the selection buttons. If, for ex-
ample, you press the left-hand selection button, the current
function switches from
Menu
to
Back
.
4.2
Basic display
Auto
5,0°C
°C
19,5
15:34
Desired heating temp. 20,0°C
Menu
Op. mode
1
3
4
5
9
8
6
7
2
1
Symbol for outdoor
temperature
2
Outdoor temperature
3
Room temperature (for
wall-mounting only)
4
Time
5
Function of the right-
hand selection button
6
Function of the left-hand
selection button
7
Desired setting
8
Symbol for
Auto
operat-
ing mode
9
Mode for the current
operating mode
The basic display appears:
–
Depending on which level you are in, you must press the
left-hand selection button several times.
–
If the control is in a selection level or setting level and
you do not operate the control for more than 5 minutes.
4.2.1
Preferred zone in the basic display
If your heating installation has several zones, the competent
person sets the zone whose values are to appear in the ba-
sic display.
4.2.2
Preferred operating mode in the basic
display
If your heating installation is designed for two of the three
operating modes (heating, cooling or ventilating), you can
switch the basic display to the required operating mode. De-
pending on the selected operating mode and the mode in
which the operating mode is found, various information may
appear in the basic display.
4.2.3
Information in the basic display
The basic display shows the most important current settings
and values for the heating installation.
Various information may appear in the basic display. It
depends on which operating mode you select and which
settings you have implemented for the selected operating
mode.
4.2.3.1 Basic display for the Heating operating
mode
Mode
Time
periods
Symbol
Desired setting
Auto
On
Desired heating temp.
appears:
–
The control maintains
the temperature at the
desired level.
Empty line appears:
–
The control does not
request any heating
energy.
Off
Day
Set-back
off
Empty line
