Operation 4
0020255037_00
multiMATIC
Operating instructions
9
4.3.1.4 Changing the desired setting in the Manual
cooling advanced function
Mode
Time
periods
Effect
Activated
On
Direct permanent change to the
Day
temp. cooling
Off
None
4.3.1.5 Using the rotary knob to make settings with
no effect
You cannot influence the following advanced functions by
turning the rotary knob:
–
System OFF active
–
Cylinder boost
–
Party function
–
1 day at home
–
Days at home scheduling
–
1 day away from home
–
Days away from home scheduling
–
Ventilation boost
–
Screed-drying function
4.3.2
Example, changing the display contrast
Auto
5.0 °C
°C
19.5
15:34
Desired heating temp. 20.0 °C
Menu
Operating mode
1.
If the display does not show the basic display, press the
left-hand selection button
Back
until the basic display
appears on the display.
2.
Press the left-hand selection button
Menu
.
◁
The controller switches to selection level 1.
Menu
Information
Desired temperatures
Timer programmes
Back
Select
3.
Turn the rotary knob until the list entry
Basic settings
is highlighted.
Menu
Planning days away from home
Planning days away from home
Days at home scheduling
Basic settings
Basic settings
Back
Select
4.
Press the right-hand selection button
Select
.
◁
The controller switches to selection level 2.
Basic settings
Language
Date/time
Display
Back
Select
5.
Turn the rotary knob until the list entry
Display
is high-
lighted.
Basic settings
Language
Language
Date/time
Date/time
Display
Back
Select
6.
Press the right-hand selection button
Select
.
◁
The controller will switch to setting level
Display
.
The adjustable value for the
Display contrast
will
be highlighted.
Display
Display contrast
Button lock
9
Back
Change
7.
Press the right-hand selection button
Change
.
◁
The highlighted value flashes.
Display
Display contrast
Button lock
9
Cancel
OK
8.
Turn the rotary knob to change the value.
