Installation instructions geoTHERM VWS/VWW 0020051574_01
44
7.2 Controller
operation
7.2.1
Familiarising yourself with the controller
Basic data
Date
Day of week
Time
Set day
2
1
3
4
5
6
Fig. 7.1 Operating overview
Key
1 Menu
name
2 Cursor indicates the selected parameter
3 Menu
number
4 Right hand dial ( ), position parameter (turn), select parameter
(press)
5 Left hand dial ( ), select menu (turn), activate special operation
(press)
6 Information line (in the example a handling request)
7.2.2 Calling up the screens
The menus are identified by a number at the top right of
the display. You can access the next menu by turning
the dial. The numbers make it easier to find individual
menus during programming.
7.2.3 Typical operating sequence on the operator
level
• Turn the dial until the menu
required has been selected.
• Turn the dial until the pa-
rameter to be modified has
been selected.
• Press the dial to mark the
parameter to be modified.
The parameter will be high-
lighted on a dark background.
• Turn the dial to modify the
parameter setting value.
• Press the dial to mark the
setting value to be accepted.
• Repeat this sequence until all
the settings have been made.
7 Start-up
