Vaderstad Cultus Series, Инструкция по эксплуатации

Страница: 14 / 42

Safety regulations
14 11.07.2011
ver. 3
1.6.2 Rolling on and off of semi-mounted CS 300-400
1 Raise the machine to the full lifting height.
2 Reverse the machine lengthwise onto the trailer or flatbed. If using a flatbed, a ramp, loading
pier or similar will be required. Take great care. Check that no machine parts are damaged
during loading.
3 Lower the machine with the hydraulic cylinder for depth setting so that it rests against the tines
and compaction roller. Add as many clips as there is space for on the hydraulic cylinder.
Depressurise the hydraulic system.
4 Unhitch the tractor from the machine.
5 Secure the machine's compaction roller to prevent rolling using chocks or similar.
6 Secure the machine using suitable lashing equipment in accordance with applicable rules. The
lashing equipment must be attached to the machine at the locations indicated by the decals; see
“Figure 1.10”.
! For information on the machine's dimensions and weight, see “6 Technical data” see page 38 !
! Always make sure that you comply with applicable national regulations concerning transport
dimensions, requirements for escort vehicles or similar!
Figure 1.10