Vaderstad Cultus Series, Инструкция по эксплуатации

Страница: 29 / 42

CS 300-400
11.07.2011
ver.3 29
3.4 Stable movement and even cultivation
NOTE!
In order to achieve stable movement and an even cultivation result, it is important to ensure
correct parallel alignment. For hydraulic mounting see “2.6 Adjusting parallel alignment, hydrau-
lically mounted” see page 22 . For trailed mounting see “2.7 Adjusting parallel alignment,
trailed” see page 23 .
Figure 3.5
3.5 Levelling units
NOTE!
The work results of the levelling units are often best if they are set in a relatively shallow
position. If the working depth is wound down too far, this may cause the opposite effect, i.e. an
uneven ground surface behind the implement.
Figure 3.6
OK
OK