Vaderstad Cultus Series, Инструкция по эксплуатации

Страница: 24 / 42

Instructions and settings
24 11.07.2011
ver. 3
2.8 Adjusting the scrapers
Scrapers for rubber ring compactors
Figure 2.14
Adjust the scrapers to ensure the gap between the tips and the rubber rings is 2-16 mm. The rec-
ommended basic setting is 6 mm. If the rubber compactor does not run cleanly, adjust the scrapers
in steps close to the compaction roller, although no closer than 2 mm.
! The scraper tips may not under any circumstances come into contact with the rubber compac-
tor, as this could then be damaged.
! Regularly check that no stones have become wedged between the rubber rings.
! Take great care when reversing the machine! If soil and plant remains become caught in the
roller ring units, there is a risk of causing damage to the scrapers if the machine is then re-
versed.
Scrapers for steel ring compactors
Figure 2.15
Adjust the scrapers to ensure the gap between the tips and the steel rings is 2-16 mm.
The recommended basic setting is 6 mm.
! Take great care when reversing the machine! If soil and plant remains become caught in the
roller ring units, there is a risk of causing damage to the scrapers if the machine is then re-
versed.
2-16 mm
2-16 mm