vacuubrand VACUU-PURE 10C, Инструкция по эксплуатации

Страница: 49 / 96

49 20901224_EN_VACUU·PURE 10C_V1.8_221122
Commissioning (operation)
5.3 5.3 Advanced operation Advanced operation
In addition to the simple operation of the vacuum pump – start,
stop, regeneration – you can carry out other functions by pressing
and holding individual keys or by combining them.
5.3.1 5.3.1 Display of software / hardware version Display of software / hardware version
1 2
5 sec
1. 1. The vacuum pump is switched
on and stopped.
2. 2. Press and hold the stop button
for 5 seconds.
>
The warning and error LEDs indicate whether the software or
hardware version is currently being displayed:
ƒ
Yellow LED (left) for warning lights up: Software version
displayed
ƒ
Red LED (right) for errors lights up: Hardware version displayed
>
The software version and the hardware version are indicated
alternately by successive flashing of the LEDs on the
operating buttons.
Display of software /
hardware version
Keep key
pressed