Vacon NXP series, Руководство по аппаратному обеспечению системы

Страница: 10 / 83

vacon • 10 Introduction
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
1.8 Lifting and moving the cabinet sections
For transport, the system drive is split into smaller sections. The cabinet sections are delivered
either in a wooden box or a wooden cage. The cabinets are transported vertically. Always refer to
shipping marks for more detailed information. To lift the cabinet sections, use lifting equipment
capable of handling the weight of the cabinets.
There are lifting beams on the top of the cabinets. Use the beams to lift and to move the cabinets to
the required location.
Figure 1. Lifting the cabinet sections
Moving of the cabinets on site can be carried out as follows by a forklift truck, a hoist or on rollers:
• Lower the package onto a level base
• Remove the package covering only at the site of installation
• Low, narrow or convoluted transport routes may require removal of the pallet prior to
movement
• Move packages in the upright position only
Figure 2. Moving the cabinet sections
Switchgear parts can easily topple backwards when manoeuvring on rollers or
manual trolleys because their centre of gravity is typically located high up at the rear
of the unit.
Min 60°
13858_00
13859_00
13006.emf