8
vacon
Keypad Remote Control Options
Step 4. Re-assembling the AC Drive (XRKPM only)
1. Plug the Keypad Interface Module (KIM) fabricated in Step 3 into the inverter, as it was originally (see
Step 2,
#4
).
2. Fasten the KIM with the two (2) M4 x 10 screws removed in
Step 2
, limiting torque to 12 in-lb. maximum.
3. Make sure that all cabling is routed so that it is not pinched in the assembly. The ribbon cable should be
routed through the opening in the cover and should exit downward.
4. If or when you re-install the cover, route the ribbon cable through the opening and limit the installation torque
on the cover screws to 26 in-lb. maximum.
Figure 4: Re-assembling the AC Drive (XRKPM Option)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
