Keypad Remote Control Options
vacon
3
Installing Keypad Remote Control Options
Introduction
Remote control options allow the keypad functionality of the
X4 and X5 AC drives
to be used remotely from the
controller itself. The options provide a NEMA 4X / IP66 rating for the keypad in a remote location. Products covered
by this instruction manual include
XRKPM, XRKWM,
and
XRKMK
.
The
XRKPM
is used with X4 or X5 drives of sizes 0, 1, and 2, when the drive is panel mounted and there is no need
for the controller to maintain its designed NEMA 4X / IP66 rating.
The
XRKWM
is used with X4 or X5 drives of sizes 0, 1, and 2, when the drive is wall-mounted and it is imperative that
the controller’s normal enclosure rating be maintained.
The
XRKMK
is used with size 3, 4, and 5 drives, and allows the keypad to be mounted in a NEMA 4X / IP66 enclosure,
while allowing the drive to maintain its designed rating (sizes 3 and 4 are NEMA 4X / IP66; size 5 is NEMA 12/IP55).
This manual is organized so that each of the products can be installed by following the steps outlined below:
Option Kit Contents
The option kits include the following materials:
NOTES:
1.
Only one will be used.
2.
To mount the keypad interface board into the proper keypad interface housing
3.
To mount the remote keypad assembly into the host enclosure
For the
XRKWM
and the
XRKMK
, customers must supply shielded cable. Belden #22418 or the equivalent is
suggested. Fifteen circuits are required, but may be accomplished with multiple strands of cable, each with fewer
conductors. This cable should not exceed 100 feet in length.
XRKPM
(panel-mounted)
Follow Steps
1, 2, 3, 4, 5
XRKWM
(wall-mounted)
Follow Steps
1, 2, 6, 7, 8
XRKMK
(enclosure-mounted)
Follow Steps
1, 9, 10, 11, 12
XRKPM
XRKWM
XRKMK
Keypad module housing (2)
1
Keypad module housing (2)
1
Keypad interface board
Keypad interface board
Keypad interface board
Keypad interface assembly
Remote keypad assembly
Remote keypad assembly
Connector stacker
Overlay
Overlay
Loop clamps
Ribbon cable (12 feet)
Wire tie (5)
Wire tie (4)
Ribbon cable clamps (4)
Wire tie base (4)
Wire tie base (4)
Screw: M2.5x6 (3)
2
Screw: M2.5x6 (3)
2
Screw: M3.5x10 (5)
2
Screws: M5x12 (4)
3
Screws: M5x12 (4)
3
Screws: M5x12 (4)
3
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
