Vacc-Safe VS -25L Series, Руководство пользователя, Страница: 6 / 27

04
Don't use the freezer in the open air. When the freezer is wet by rain, it may
cause electric leakage or electric shock.
Freezers should not be placed in damp places or places vulnerable to
splashing water. Otherwise, electric leakage or electric shock will be caused
due to insulation reduction.
Do not pour water directly on the freezer, otherwise it may cause electric
shock or short circuit.
Users are not allowed to disassemble, repair or modify the freezer by
themselves. Otherwise, it may cause fires or personal injuries due to improper
operations.
Do not ground the freezer through gas pipe, power supply pipe, telephone
line or lightning rod. The above grounding may cause electric shock or other
hazards.
Do not touch any electrical parts such as power plug or any switch with wet
hands, otherwise electric shock may be caused.
Do not put containers or heavy objects containing water on the freezer. If
the object falls, it may cause personal injuries, and the outflow of water will
reduce the insulation and cause leakage or electric shock.
Do not insert metal objects such as nails or wires into any openings and gaps
of the freezer or into any vent used for internal air circulation, otherwise
electric shock or injury may be caused by the above objects contacting with
moving parts.
Note
--------------------------------------------------------------------------------------------
There should be no obstruction around the freezer, and the ventilation
should be smooth.
It is necessary to check the freezer setting when restarting the freezer after
power failure or power off.
Changes in settings may damage stored items.
Once the power of the freezer is cut off, it will take more than five minutes to
turn it on again to avoid damage to the compressor or system.
Gloves should be worn during maintenance to no to touch the sharp edges
or corners and avoid the injuries to personnel.
Hold the handle to close the door so that the door will not catch your fingers.
When moving freezers, the inclination angle should not be more than 45
degrees.