ENGLISH
- 51 -
PARAMETER
VALUE
SUBMENU DESCRIPTION
DEFAULT
CHAPTER
MEMO
S.ENC
1-7
Encoder sensibility
0
12.2
0
Obstacle detection by disabled encoder
OST.A
0.5”-4.5”
Backing at obstacle during opening phase
0.0”
12
0.0”
Door stop
FULL
Complete closing of the door
OST.C
0.5”-4.5”
Backing at obstacle during closing phase
FULL
12
0.0”
Door stop
FULL
Complete opening of the door
CH.OS
Closure after obstacle
AUTO
12
MAN
Manual
AUTO
Automatic (if activated through
CH.AU
parameter)
I.ADI
ADI device enable
NO
24
NO
ADI interface disabled
SI
E.ADI
ADI interface enabled
RICH
Reclosing at startup
SI
NO
Function disabled
SI
When the power supply is activated the unit
set for closing: the first START command starts
the motor closing. If the automatic closing is
activated (
CH.AU
), the count of pause time
starts and closing is activated
T.ADD
0.5”-1’
Extra travel
1.0”
16
NO
The door ends its travel even if the limit
switches have not been activated
FINE
Exit the programming menu
NO
NO
Do not exit the programming menu
SI
Exits the programming menu by storing the
parameters set
