![background image](http://html1.mh-extra.com/html/v2/atris-700/atris-700_user-manual_3098986029.webp)
ENGLISH
- 27 -
4 - INSTALLATION OF
GUIDE SECTION BAR
1.
Remove the section bar from its
cardboard packaging and check its
integrity.
2.
Unfold the section bar as indicated in
the figure below.
3
Once the section bar is elongated, slide
the connecting section bar
R
to the end
position indicated by the two holes
Q
on the chain-guide section bar.
4.
Adjust the tension of the chain/belt
using the Allen-head screw with a
10 mm Allen-wrench: turn the bolt until
the chain/belt is sufficiently tight.
m
CAUTION: After tensioning the
chain/belt make sure the drive carriage
slides freely throughout the length of
the guide.
Eliminate any friction prior to
proceeding with the next phases of
installation.
Q
Q
R
Содержание ATRIS-700
