IT-05
IT
Classe climatica
L'apparecchio è progettato, a seconda
della classe climatica, per l'esercizio a
determinate temperature ambiente. La
classe climatica dell'apparecchio è indi-
cata sulla targhetta dati.
Per garantire un funzionamento perfet-
to, rispettare le temperature ambiente
indicate.
Classe climatica Temperatura ambiente
SN
da +10 °C a +32 °C
N
da +16 °C a +32 °C
ST
da +16 °C a +38 °C
T
da +16 °C a +43 °C
SN-ST
da +10 °C a +38 °C
SN-T
da +10 °C a +43 °C
Posizionamento
• Evitare il posizionamento dell'apparecchio in aree diretta mente
esposte ai raggi del sole, accanto al forno, al riscalda mento e
similari.
• In conformità alla norma EN 378, il locale di installazione dell'ap
-
parecchio deve avere un volume di 1 m
3
per 8 g di refrigerante
R 600a, affinché in caso di perdita del circuito raffreddante non
possa avere origine una miscela infiammabile di gas e aria nei
locali di installazione dell'apparecchio. L'indicazione della quantità
del liquido refrigerante è riportata sulla targhetta dati nel vano
interno dell'apparecchio.
Collegamento elettrico
L'apparecchio funziona solo a
corrente alternata
.
La tensione e la frequenza ammesse sono indicate sulla targhet-
ta dati. La posizione della targhetta dati è indicata nel capitolo
Descrizione dell'apparecchio
.
La presa deve essere sia messa a terra in modo regolamentare
che protetta elettricamente.
La corrente di azionamento del fusibile deve essere compresa
tra 10 A e 16 A.
La presa non deve trovarsi dietro all'apparecchio
e deve essere facilmente raggiungibile.
Non collegare l'apparecchio con una prolunga
o una presa multipla.
Non utilizzare invertitori per impianti ad isola
(conversione di corrente continua in corrente
alternata o corrente trifase) o connettori a
risparmio energetico. Pericolo di danni per
l'elettronica!
Meccanismo di apertura dello sportello (Tou
-
chOpen)
L'apparecchio dispone di un mec-
canismo di apertura dello sportello.
Aprire lo sportello
Spingere leggermente lo sportello
verso l'interno, esercitando pres-
sione sulla parte in alto a sinistra,
e poi rilasciare.
Lo sportello si apre di ca. 7 cm
grazie alla barra a spinta.
A questo punto è possibile
aprire completamente lo
sportello.
Indicazione
Se non viene aperto del tutto,
lo sportello si richiude in au-
tomatico dopo ca. 3 secondi.
Non spingere a fondo o trattenere la barra a spinta
durante la chiusura!
Se la barra a spinta viene bloccata
durante la chiusura, non raggiunge
più la posizione di uscita.
In posizione di uscita la barra a
spinta è a filo della parte anteriore
dell'apparecchio.
Risistemare la barra a spinta nella posizione di
uscita
Estrarre la spina, attendere ca. 5 secondi e inserirla di
nuovo.
La barra a spinta si risistema in posizione di uscita.
Avvertenze importanti
Non usare l'apparecchio in prossimità di campi
magnetici oppure non mettere oggetti magnetici
nelle vicinanze dell'apparecchio.
Ciò potrebbe causare l'apertura accidentale dello
sportello.
Non bloccare o trattenere lo sportello durante
l'apertura!
Se lo sportello viene bloccato o trattenuto durante l'apertura, si
attiva il giunto di sicurezza interno.
Si sentono ripetuti scricchioli ben distinti.