7 Care and maintenance
7.8
Cleaning the temperature sensor
As required
The appliance will not start without the base filter
1
in place.
▸ Remove the base filter
1
.
▸ Clean the temperature sensor
2
with a
damp cloth.
▸ Insert the base filter
1
.
2
1
7.9
Cleaning the additional filter mat and heat pump mat
As required or with «A11»
The appliance will not start without the base filter 1 in place.
▸ Remove the base filter
1
.
▸ Take out the additional filter mat
2
.
▸ Remove the fluff while dry from the addi-
tional filter mat
2
. Next rinse under run-
ning water and then wring out.
▸ Wash on a 40 °C wash programme to
clean off heavier deposits.
1
2
3
▸ Clean the heat pump mat
3
, behind the
grille, carefully using a brush and va-
cuum cleaner with the crevice tool at-
tachment.
3
28
