![background image](http://html1.mh-extra.com/html/v-zug/unimatic-tsl-wp/unimatic-tsl-wp_operating-instructions-manual_3121392019.webp)
6 Drying
6.3
General note on programme selection
Use the 'Programme overview' to determine which programme is the most suitable
for your washing.
Selecting a programme
An automatic programme can be selected with the press of a single button. All the ne-
cessary settings for the programme are provided automatically.
Additional functions can be selected or deselected by pressing the corresponding but-
ton.
If no other button is pressed within the next 15 seconds, the programme selected starts
automatically.
Once a programme has started, it is no longer possible to change it. The pro-
gramme must be aborted.
Changing programme selection
During programme selection, a programme that has already been selected can be
changed at any time by selecting a new programme. All previously selected settings are
cleared.
Aborting programme selection
▸ Press the
button.
–
Programme selection is aborted.
Duration remaining indicator
During programme selection, the expected duration of a programme is shown. This cor-
responds to a load containing similar wash items with a defined weight.
Load determination occurs after the programme start:
–
In the display appears:
Determining load
1h35
–
The letter «h» flashes: the expected duration remaining is calculated and then dis-
played.
Depending on fabric type, the actual running time may differ from the duration
shown. The duration remaining shown – especially towards the end of the pro-
gramme – can freeze for several minutes. During this period, the letter «h» flashes
and the duration remaining is recalculated.
–
The letter «h» flashes again and in the display
appears:
Calculating time
remaining
0h15
–
This alternates with the level of dryness achieved.
–
The time remaining is recalculated and then displayed.
19