7 Care and maintenance
2
Filter mat in
door filter
Wash before change
of user
Remove any build-up of fluff while dry, then
rinse under running water and wring out well.
Use 40°C wash programme for cleaning stub-
born soiling.
3
Base filter
As required *
Remove any fluff.
Whenever there is a
heavier build-up of
deposits
Use an abrasive liquid cleaning agent and a
sponge, rinse with water and allow to drip dry;
in the case of hard water, clean with cleaning
vinegar.
4
Additional filter
mat
As required *
Remove any build-up of fluff while dry, then
rinse under running water and wring out well.
Use 40°C wash programme for cleaning stub-
born soiling.
5
Heat pump
mat
As required * (va-
cuum clean once
every three months)
Clean with a vacuum cleaner.
6
Cooler filter
As required *
Remove any build-up of fluff while dry, then
rinse under running water.
Exterior of ap-
pliance
Occasionally
Rub down with a damp cloth and wipe dry.
*
A coating of fluff can build up more or less quickly depending on the type of wash
and the size of load.
7.2
A9 error message
A9 Clean filters
and mat
A thick coating of fluff results in a reduced process air flow which can impair the
drying process and trigger the «A9» error message.
Check and, if necessary, clean the following parts in the appliance:
▪
Door filter
▪
Filter mat in door filter
▪
Base filter
▪
Additional filter mat
▪
Heat pump mat
7.3
A11 error message
A11 Clean heat pump and
cooler filter
Check and, if necessary, clean the following parts in the appliance:
▪
heat pump mat
▪
cooler filter
After cleaning, if the «A11» error message appears in the display again, the parts
in the appliance that can trigger an «A9» error message must also be checked
again.
24
