4 Programme overview
Separate rinsing / Separate spinning
It is possible to skip parts of the programme selected.
▸ Select main programme according to fabric care labels.
▸ Touch the
button 1×.
–
Rinsing and final spin are selected.
▸ Touch the
button 2×.
–
Final rinse / Conditioning and final spin are selected.
▸ Touch the
button 3×.
–
Separate final spin is selected.
4.3
Additional functions
Temperature setting
The temperature can be changed in steps of 10 °C or 15 °C, allowing slightly
soiled (not stained) textiles to be washed with a saving in energy.
Cold wash:
Not heated
Spin speed
The spin speed can be changed in steps of 200 rpm (1200, 1000, 800, 600,
400 rpm, stop after rinsing, 1500, 1400 rpm). Delicates can thus be spun at a
low spin speed. However, this increases the drying time (greater energy con-
sumption for tumble drying).
Delayed start
Take advantage of cheap-rate electricity (setting range of up to 24 hours).
When the delayed start time set is reached, the programme starts automatic-
ally.
Fast forward / End of programme
Touch the
button to skip individual parts of a programme at any time dur-
ing the programme sequence.
Pause / Door opener
Touching the
button 1× when a programme is running will cause the pro-
gramme to pause. Touching the
button again will cause the appliance
door to open provided the appliance is in a state that allows this action (de-
pends on the water level, temperature and speed).
Touch the flashing main programme button to end the pause and resume the
programme.
13