![background image](http://html1.mh-extra.com/html/v-zug/unimatic-s/unimatic-s_operating-instructions-manual_3138203031.webp)
8 Trouble-shooting
... in the display appears
Possible cause
Solution
▪
Hygiene recommendation.
▪
No wash cycle has been car-
ried out at a temperature of at
least 60 °C for a longer period
of time.
▸ With one of the next wash cycles carry out a pro-
gramme with at least 60° C.
or
▸ Unload the washing.
▸ Press the
button 1×.
–
The «Appliance hygiene» programme starts.
... the programme takes significantly longer than indicated in the display
Possible cause
Solution
▪
Using too much washing de-
tergent. Lengthening the rins-
ing time.
▸ Reduce the amount of washing detergent used
next time.
▪
Large unbalanced load in the
washing drum.
▸ Wash large and small items together to reduce the
possibility of unbalanced loads forming.
▪
Inlet water very cold. Heating
is extended.
No action is necessary.
… the washing is not spinning or is not being spun properly
Possible cause
Solution
▪
The spin speed is set too low. ▸ Increase spin speed for next wash cycle.
▪
Too unbalanced a load in the
washing drum. The wash
items cannot be more evenly
distributed.
▸ Wash large and small items together to reduce the
possibility of unbalanced loads forming.
… vibrating heavily when spinning
Possible cause
Solution
▪
The transport lock has not
been removed.
▸ Remove transport lock.
▪
The feet of the appliance are
not properly adjusted.
▸ Optimize the appliance set-up according to
the installation instructions.
▪
The load could not be optim-
ally balanced in the washing
drum. This is not a malfunc-
tion.
▸ Wash large and small items together to reduce the
possibility of unbalanced loads forming.
31