![background image](http://html1.mh-extra.com/html/v-zug/unimatic-s/unimatic-s_operating-instructions-manual_3138203032.webp)
8 Trouble-shooting
… at the end of the programme, the appliance door cannot be opened by
pressing the door opener button
Possible cause
Solution
▪
The appliance door is stuck.
▸ Press hard against the lock area of the appliance
door (i.e. front edge of appliance door).
▸ Touch the
button.
▪
An interruption in the power
supply.
▸ Use the emergency door release.
… water sounds are heard at the end of the programme when the washing drum
is turned by hand
Possible cause
Solution
▪
The water that the vanes were
filled with to compensate the
unbalanced load could not be
completely drained before the
end of the programme.
No action is necessary. The expelled water is auto-
matically pumped out and there are no negative con-
sequences.
... traces of washing detergent left behind in the washing detergent
compartment
Possible cause
Solution
▪
Damp or lumpy washing deter-
gent.
▸ Store washing detergent in a dry place.
▪
The detergent compartment
was damp and a delayed start
was selected.
▸ Wipe the detergent compartment dry before
adding the detergent.
▪
The water flow pressure is too
low.
▸ Open water tap fully.
▪
The water inlet is scaled up.
▸ Check water inlet and, if necessary, clean the wa-
ter inlet filter.
▸ Clean the injection nozzles above the detergent
dispenser drawer.
▪
The flap for liquid detergent
was used.
▸ Remove the flap and put in storage position.
... traces of fabric conditioner or water left behind in the fabric conditioner
compartment
Possible cause
Solution
▪
The siphon in the fabric condi-
tioner compartment is missing
or is not in place correctly.
▸ Insert the siphon correctly.
▪
The siphon or suction tube is
clogged.
▸ Clean the siphon and suction tube.
32