V-TEK TM-401, Руководство пользователя

Страница: 69 / 292

D292104.6.fm MTID Tab
Chapter 3: Human Machine Interface 3-27
C. Press the Pitch Wizard button to open the Pitch Wizard ..
A. Help Icon
B. Head Jog Controls
C. Pick Wizard Control buttons
A. To see an illustration of the correct head placement,
push the Help icon. An illustration of the Tube Feeder
with the first track identified will appear.
B. The Jog buttons in the Head Settings section are used
to jog the head forward or backward along the X Axis
(left/right) until the nozzle is centered over the first
Tube Pocket .
Head Jog Step is the distance in millimeters that the
head will move when Jog is pressed.
Note: Enter Jog Step field values in the following format: XXX.XX. (i.e. 100.00).
The Head Position indicates where the pick head is located in relation to the
Home position. The Learned Position indicates the current Pick position.
C. Press the Cancel button to return to the MTID Tab . Once the Learn button has
been pressed, the Cancel button disappears.
Pressing Learn saves the current head position as the programmed pick location.
This is the position the pick head will move to along the X Axis (left/right) when
picking a part from the
Tube Feeder .
The Next button appears after Learn has been pressed. Press the Next button to
advance to the second Pitch Wizard screen.
B
C
A